79th Annual Meeting of the APS Division of Fluid Dynamics (Nov 22 — 24, 2026)

P4433403: Bubbly Pearls

Authors
  • Jefferson Santos da Silva, Brigham Young University
  • Aaron K. Brubaker, Brigham Young University
  • Dallen Pond, Brigham Young University
  • JESSE L. BELDEN, Naval Undersea Warfare Center (NUWC)
  • Tadd T. Truscott, King Abdullah Univ of Sci & Tech (KAUST)
  • Nathan B. Speirs, Brigham Young University

A falling water-glycerin mixture takes on the shape of a strand of pearls in the image on the left. A 105-cm tall volume of 75 wt% glycerin, 25 wt% water is suddenly released from a 2.55-cm-outer-diameter tube. As the mixture falls, a boundary layer develops on the tube walls leaving behind a thin liquid film. When the trailing end of the main liquid mass exits the tube, the liquid film on the walls also exits connecting the main mass to the tube exit in a tubular shape as shown in the first of five high-speed images below (66-ms intervals). Surface tension and aerodynamic pressure cause the liquid film to pinch inward forming bubbles separated by thin liquid jets (images 2-4). Air blown through the tube encourages more frequent pinch-off events and bubbles. Front and back lighting with colored gels illuminates the strand of bubbles enhancing the shapes and features. For a brief moment a bubble chain appears (image 5 and image on the left) reminiscent of a dangling strand of pearls lit by the setting sun.

This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. Any reuse must credit the author(s) and provide a link back to this page.