79th Annual Meeting of the APS Division of Fluid Dynamics (Nov 22 — 24, 2026)

V4422211: Spatial Evolution of Vortical Structures and Wall Shear Stress in Helical Pipe Flow

Authors
  • Yan Zhang, North Dakota State University
  • Omid Nazempour, North Dakota State University
  • Yildirim B. Suzen, North Dakota State University

As flow enters a curved pipe, centrifugal effects redistribute streamwise momentum toward the outer wall. The resulting transverse pressure gradient drives secondary motion and generates counter-rotating Dean-type vortices. In a helical pipe, the continuously changing geometry further deforms and reorganizes these vortical structures as the flow progresses downstream.This visualization presents the spatial development of secondary flow and wall shear stress in a helical pipe using three-dimensional CFD. The pipe has a circular cross-section with diameter D=15 mm, coil radius Rc/D=1.5, and pitch P/D=6. The flow is simulated at Re=1800 using a steady-state, incompressible formulation with an intermittency-transport SST transition model.A centerline-following perspective carries the viewer through the helix, revealing three-dimensional streamlines and the downstream reorganization of the secondary vortical structures. The visualization then connects these internal flow patterns to their effect on the pipe wall. Secondary motion redistributes momentum across the cross-section, alters near-wall velocity gradients, and produces a strongly nonuniform wall shear stress distribution around and along the helical surface.The visualization highlights the direct connection between curvature-induced secondary-flow organization and wall shear stress redistribution in a helical conduit.

This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. Any reuse must credit the author(s) and provide a link back to this page.