Shock wave-turbulent boundary layer interactions (SWTBLI) in supersonic regimes are critical to the aerodynamic characteristics of high-speed aircraft. In particular, turbulence amplification and low-frequency shock motion can dramatically alter the structure of the boundary layer and the large-scale separation bubble, leading to shock buffeting, thermal loading, and structural fatigue. Direct numerical simulations (DNS) are performed to solve the compressible Navier-Stokes equations for SWTBLI over a 24ο compression ramp at a freestream Mach number of 2.9. Inflow turbulence is generated using a recycling-rescaling method with a recycling distance of 10δin from the inflow plane, where δin denotes the nominal boundary-layer thickness at the inflow. Shock wave-turbulent boundary layer interactions (SWTBLI) in supersonic regimes are critical to the aerodynamic characteristics of high-speed aircraft. In particular, turbulence amplification and low-frequency shock motion can dramatically alter the structure of the boundary layer and the large-scale separation bubble, leading to shock buffeting, thermal loading, and structural fatigue. Direct numerical simulation (DNS) are performed to solve the compressible Navier-Stokes equations for SWTBLI over a 24ο compression ramp at a freestream Mach number 2.9. Inflow turbulence is generated using a recycling-rescaling method with a recycling distance of 10δin from the inflow plane, where δin denotes the nominal boundary-layer thickness at the inflow. These findings clarify the turbulence amplification and low-frequency unsteadiness on SWTBLI over compression ramps and provide guidance for the aerodynamic design of supersonic and hypersonic intake systems.
This work is licensed under the Creative Commons Attribution-NonCommercial 4.0 International License. Any reuse must credit the author(s) and provide a link back to this page.